Intermec 4420 User Manual page 8

4420 and 4440 Printer Self-Strip/Batch Takeup User's Manual
7. Turn the media takeup hub counterclockwise until the media fits snugly
8. Turn the head lift lever counterclockwise to secure the printhead.
9. Replace the media cover.
10. In the back of the printer, turn on DIP switch number 8 on the top bank of
11. Turn on the printer.
12. Configure the printer for batch. For help, see "Configuring Your Printer for
8
To have the media rolled onto an empty core, place the core onto the takeup
hub, turn the media lock clockwise to lock the core into place, and tape the
end of the media to the core.
44XXI.007
against the takeup hub.
DIP switches.
Self-Strip or Batch" later in this document.
Media
lock
Empty
core
I O
I O
44XXI.003