Intermec 4420 User Manual page 10

4420 and 4440 Printer Self-Strip/Batch Takeup User's Manual
4. If you work in a hot or humid environment (temperature at or above 104 F
5. Choose OK.
6. Click the Paper Type button.
7. From the Paper Type dialog box, set the Label Width to match the width of
8. For Self-Strip mode, make sure you select Gap under Label Stock.
9. Choose OK.
10
[40 C] and humidity at or above 90 percent), select the Hot/Humid
Environment box.
the media in the printer. The default setting is 4 inches.
Note: If you want to change other configuration settings, you should do so before
going to Step 10. For help changing the configuration, see the Help menu.