4420 and 4440 Printer Self-Strip/Batch Takeup User's Manual
Loading Media for Batch Takeup
Use batch takeup to collect printed media onto the takeup hub. The media can
spool directly onto the takeup hub or onto a core.
Note: After the printer prints the last label and passes the end of the media roll through
the printhead, the takeup hub will turn for a few revolutions before stopping.
To load media for batch takeup
1. Turn off the printer
2. Load media into the printer, leaving the media cover off. For help, see your
3. Turn the head lift lever clockwise to raise the printhead.
4. Hook the batch guide over the top of the media access door and push down
6
user's manual.
on the bottom of the batch guide to latch it into place.
Batch
guide
Head lift
lever
Media
access
door
44XXI.004