Intermec 4420 User Manual page 11

10. Click the Send Command button.
11. Exit PrintSet.
Cleaning the Self-Strip Roller and Sensors
The self-strip roller should be cleaned after every fifth media roll or as needed
to prevent the accumulation of dirt, debris, and adhesive residue. The label
taken sensor and takeup hub sensor should be cleaned after every tenth media
roll. Clean more often in environments that are harsh or dusty.
Caution
Do not use sharp objects such as knives or screwdrivers to scrape the self-strip
roller clean. Cleaning with sharp objects will damage the self-strip roller.
Clean with only a cotton swab, or a clean, lint-free cloth or tissue damp with
isopropyl alcohol.
Conseil
N'utilisez pas d'objets pointus tels que couteaux ou tournevis pour nettoyer la
barre de roulement. Nettoyer avec des objets pointus endommagera la barre de
roulement. Nettoyez-la seulement avec de la ouate ou avec un linge propre et
libre de peluches, humecté avec de l'alcool d'isopropyl.
To clean the self-strip roller and sensors
1. Turn off the printer.
2. Unplug the printer power supply.
3. Pull the bottom of the media cover away from the base of the printer, lift the
4. Unlock and remove the media from the media slot. If the media is wrapped
4420 and 4440 Printer Self-Strip/Batch Takeup User's Manual
A message box appears asking if you want to overwrite the current printer
settings. Choose Send to enable self-strip or batch with the configuration
you have created.
front of the media cover upward to release it from the printer frame, and lift
the media cover away from the top of the printer.
all the way around the takeup hub, cut the media close to the takeup hub or
before the last printed label and remove the media wrapped around the
takeup hub.
11