Charging Batteries - C-SCOPE Newforce R1 Operating Instructions Manual

Newforce
Table of Contents

Advertisement

OPTIONAL ACCESSORIES from C-Scope
Headphones:
Headphones not only extend battery life but also improve sensitivity by reducing external
noises. The headphones should be fitted with a standard stereo 6.35mm, (1/4 inch), jack
plug. The headphone socket is located under the protective cap in the battery housing.
(NOTE: Stereo mode must be selected on headphones fitted with a stereo/mono switch).
Rechargeable battery pack:
A shrink wrapped pack of 8 rechargeable Nickel Cadmium batteries to replace the standard
batteries and holder.
Battery charger:
The C-Scope battery charger is designed to charge the rechargeable pack safely and
efficiently.

CHARGING BATTERIES

A battery charge socket is provided for use with the C-Scope battery charger (see
Accessories) and is located under the protective cap in the battery housing. (The smaller of
the two sockets.) Inserting the charger will automatically remove the power from the detector
so the charger must be removed to do a battery check. Do not attempt to recharge standard
batteries. It will take approximately fourteen hours to fully recharge flat batteries with the C-
Scope charging unit.
For further information, and a price list, for all C-Scope accessories please telephone
(01233) 629181, e-mail:
info@cscope.co.uk
or contact your local dealer.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents