Planet ADN-4000 User Manual page 55

The following table describes the labels in this screen.
Parameter
Address Mapping Rule
Rule Index
Rule Type
Local Start & End IP
Public Start & End IP
Description
Show the Address Mapping for single or multiple
IP Addresses.
Choose the rule number.
There are 4 types of One-to-One,
Many-to-Many Overload, and
No-Overload.
Enter the local IP address you plan to map to.
Local Start IP is the starting local IP address &
Local End IP is the ending local IP address. If the
rule is for all local IPs, then the Start IP is 0.0.0.0
and the End IP is 255.255.255.255.
Enter the Public IP Address you want to do NAT.
Public Start IP is the starting Public IP Address
and Public End IP is the ending Public IP
Address. If you have a Dynamic IP, enter 0.0.0.0
as the Public Start IP.
55
Many-to-One,
Many-to Many