Introduction; Feature - Planet ADN-4000 User Manual

1 Introduction

The PLANET 802.11n Wireless ADSL 2/2+ Router with 2T3R MIMO antenna technology,
ADN-4000, provides office and residential users the ideal solution for sharing a high-speed ADSL
2/2+ broadband Internet connection and four-10/100Mbps Fast Ethernet backbone. It can support
downstream transmission rates of up to 24Mbps and upstream transmission rates of up to 3.5Mbps.
The product supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 2684
encapsulation over ATM (bridged or routed), PPP over Ethernet (RFC 2516), and IPoA (RFC1483)
to establish a connection with ISP.
With built-in IEEE 802.11b/g/n Draft 2.0 wireless network capability, all computers and
wireless-enabled network devices can connect to the ADN-4000 without additional cabling. New
802.11n Draft 2.0 wireless capability also gives you the highest speed of wireless experience ever.
With a compatible wireless card installed in your PC, you can transfer file up to 300Mbps (transfer
data rate). The radio coverage is also doubled, so you don't need to worry if the size of your office or
house is big.
To secure the wireless communication, the ADN-4000 supports most up-to-date encryption, WEP,
and WPA-PSK/ WPA2-PSK. In order to simplify the security settings, ADN-4000 supports WPS
configuration with PBC/PIN type. Your whole wireless network can be secured.
Via the user-friendly management interface, ADN-4000 can be managed by workstations running
standard web browsers. Furthermore, ADN-4000 provides DHCP server, NAT, Virtual Server, DMZ,
Access Control, IP Filter, PPTP/IPSec/L2TP pass-through, DDNS, and UPnP capability.
The ADN-4000 also serves as an Internet firewall, protecting your network from being accessed by
outside users. It provides the natural firewall function (Network Address Translation, NAT). All
incoming and outgoing IPs are monitored and filtered. Moreover, it can be configured to block
internal users from accessing to the Internet.

1.1 Feature

Internet Access Features
Shared Internet Access All users on the LAN can access the Internet through the ADN-4000
using only a single external IP Address. The local (invalid) IP Addresses are hidden from external
sources. This process is called NAT (Network Address Translation).
Built-in ADSL 2/2+ Modem The ADN-4000 provides ADSL 2/2+ modem, and supports all
common ADSL connections.
Auto-detection of Internet Connection Method In most situations, the ADN-4000 can test your