American Standard Colony Oval Whirlpool and Bathing Pool 1742.002 Specification Sheet

COLONY OVAL 6' WHIRLPOOL & BATHING
POOL
1742.018 Whirlpool featuring System I:
• Acrylic with fiberglass reinforcement
• Molded-in backrest
• Dual, molded in arm rests
• 1.0 HP single speed, self-draining
pump / motor
• Factory installed power cord with plug
• Six multi-directional and flow-adjustable jets
• Side-mounted air switch On / Off
• Two air volume controls
• Factory installed and tested whirlpool system
1742.018C Stay Clean™ Whirlpool Massage
Featuring System I:
• Same as above except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®
1742.002 Bathing Pool only
Nominal Dimensions: 71" x 41" x 23-7/8"
(1805 x 1040 x 606mm)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
02/04
WHIRLPOOL & BATHING POOL
To Be Specified - Required:
Color:
To Be Specified - Optional:
Bath Drain: 1583.470*
Bath Filler: *
* See you American Standard Distributor
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
© 2004 American Standard Inc.
COLONY OVAL 6'™
HIGH GLOSS ACRYLIC
BV-31A