Intellibrite ® Underwater Pool Led Color-Changing Light; Intellibrite Pool Led Light Models; Using An External Isolating Safety Transformer For Intellibrite; 12 Vac Lights - Pentair IntelliBrite Installation And User Manual

®
IntelliBrite Underwater Pool LED Color-Changing Light
®
The IntelliBrite underwater pool LED (light-emitting diode) light system gives you brilliant vivid multi-colors with
spectacular effects for your pool. The energy efficient colored LED array can cycle through colors at varying speeds
and in different sequences of color. The unique IntelliBrite
underwater light reflection providing increased light intensity. Choose one of the seven pre-programmed color light
shows or select one of the five fixed colors to create virtually endless range of dramatic underwater lighting effects.
®
IntelliBrite LED lights are fully compatible with IntelliTouch
information about using IntelliBrite
®
IntelliTouch User's Guide (P/N 520102) and the EasyTouch
®
IntelliBrite Pool LED Light models
The two models of IntelliBrite
®
IntelliBrite Pool LED Light, 120 VAC, with integrated 12 VAC transformer, 50 ft. cord length* (P/N 600101)
IntelliBrite ® Pool LED Light, 12 VAC, (requires a 12 VAC 60 Hz [50 Hz where applicable] external isolating safety
transformer), 50 ft. cord length* (P/N 600104) — (*) cord length vary from 30 ft. to 100 ft.

Using an External Isolating Safety Transformer for IntelliBrite

For information about using multiple 12 VAC IntelliBrite
Operating IntelliBrite
IntelliBrite ® LED lights can be controlled using a standard wall-mount light switch. Multiple IntelliBrite
be connected via a junction box to a single switch so that all lights can be switched on and off together. IntelliBrite
lights are controlled by cycling AC power from a standard wall switch. By turning the switch on and off a specific number
of times, the light activates one of the seven light show modes, fixed colors, and enables the "Hold" and "Recall" feature.

Selecting a light show mode or fixed color

Switch power on to the light. A white light will momentarily illuminate, followed by the previously selected color. To select
a color show mode (1-7) or fixed color (8-12), turn the wall switch off/on a specific number of times. Each number (1-12)
shown below corresponds to the number of times to power-cycle the switch to activate a color light show or fixed color.
For details about saving color effects while in "show" modes, see "Hold" and "Recall" feature on page 2.
®
1. SAm Mode: Cycles through white, magenta, blue and green colors (emulates the Pentair SAm
2. Party Mode: Rapid color changing building energy and excitement.
3. Romance Mode: Slow color transitions creating a mesmerizing and calming effect.
4. Caribbean Mode: Transitions between a variety of blues and greens.
5. American Mode: Patriotic red, white and blue transition.
6. California Sunset Mode: Dramatic transitions of orange, red and magenta tones.
7. Royal Mode: Richer, deeper color tones.
8. Blue: Fixed color.
9. Green: Fixed color.
10. Red: Fixed color.
11. White: Fixed color.
12. Magenta: Fixed color.
13. Hold: Save the current color effect during a color light show.
14. Recall: Activate the last saved color effect.
Example: To select California Sunset Mode; turn the switch off and on six successive times.
Turn
▼
switch
▼
Off/On
six times
WARNING: During the off/on switching process, before the selected color is displayed, no illumination will
occur. This operating mode is normal during the switching process. During this period the pool and spa will be
dark and precautions should be taken to avoid unforeseen accidents. Failure to observe this warning may result
in serious injury or death to pool and spa users.
® lights with IntelliTouch
® Pool LED light are:
®
®
LED lights using a wall switch
During the off/on switching process, no
illumination will occur, then a white light
will momentarily illuminate.
®
lens geometry provides a wider beam for greater
® ®
and EasyTouch automation systems. For more
® and EasyTouch ® automation systems, refer to the
®
User's Guide (P/N 520584).
®

12 VAC Lights

lights on an external isolating safety transformer, see
1
page 10.
® LED lights can
®
LED
®
light).
Followed by the
selected
"California
Sunset Mode"