System; Ip Configuration - Planet WSD-800 User Manual

8-port 10/100mbps managed ethernet switch

Hide thumbs Also See for WSD-800:

Table of Contents

WSD-800 Web Management Interface

4.4 System

The switch can be managed by the Web/Telnet/SNMP interfaces. Administrators can access the

management interface via the IP address of the switch. The default IP address of the switch is

192.168.0.100. You can change the IP address to be in the same IP segment as your LAN network for

convinence.

To change the IP address, click on the System/IP Address menu button. The IP address configuration

screen then shows in the main page on the web. Enter the new IP address, Submask and Gateway then

click on the OK button to change.

IP Address Configuration

Table of Contents