ProForm 590 Spx Bike Manual page 12

CONSOLE DIAGRAM
Left
Button
FEATURES OF THE CONSOLE
The console offers a selection of features designed
to provide instant exercise feedback and make your
workouts more effective.
The console features a heart rate alarm that helps you
keep your heart rate within your selected target heart
rate zone while you exercise. Note: To use this feature,
you must wear an optional heart rate monitor (see
page 16).
The console also allows you to personalize settings,
select a system of measurement, and enter user infor-
mation before you begin exercising.
To personalize console settings, see the instruc-
tions at the right. To set the clock, see page 14. To
use the console, see page 14. To use the heart rate
alarm, see page 16.
Before using the console, make sure that batteries
are installed in the console and the transmitter (see
assembly step 10 on page 8 and assembly step 12 on
page 9). If there is a sheet of plastic on the display,
remove the plastic.
HOW TO PERSONALIZE CONSOLE SETTINGS
1. Turn on the console.
Press any button to turn on the console.
2. Enter the setup mode.
First, press the Left but-
ton repeatedly until the
word SPEED appears in
the lower display.
Then, press and hold the Right button for several
seconds to enter the setup mode.
Note: The console will exit the setup mode auto-
matically if several seconds pass and no buttons
are pressed.
3. Set a time goal if desired.
When you enter the setup
mode, the minutes place
in the lower display will
Right
flash.
Button
To set a time goal for
your workout, press the
Right button repeatedly to
select the desired number
of minutes. To select a
time goal quickly, press
and hold down the Right button.
Note: You can set a time goal between 1 and 99
minutes.
Note: If you set a time goal, the lower display will
count down the time remaining in your workout
instead of the elapsed time (see step 3 of HOW
TO USE THE CONSOLE on page 14).
Press the Left button to advance to the next
setting.
12