Yamaha YZF-R125 Service Manual page 67

YamahaR125.COM
1. Coolant reservoir hose
2. Radiator inlet hose
3. Spark plug lead
4. Wire harness
5. FID (fast idle solenoid) lead
6. Fuel injector lead
7. Rear brake light switch lead
8. Throttle body sensor assembly
9. Ignition coil leads
10. Air filter case silencer hose
11. Wire harness (to horn)
12. Clutch cable
13. Throttle cable
14. Wire harness (to left handlebar switch)
15. Front brake light switch lead
16. Right handlebar switch lead
17. Main switch lead
18. Cylinder head breather hose
A. Fasten the wire harness with the plastic locking tie.
B. Fasten the fuel injector lead and FID (fast idle
solenoid) lead with a plastic locking tie.
C. Pass the clutch cable through the guide.
D. Secure the plastic locking tie by inserting the
projection on the tie into the hole in the frame.
2-44
CABLE ROUTING