YamahaR125.COM
EAS23230
REMOVING THE REAR SHOCK ABSORBER
ASSEMBLY
1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
NOTE:
Place the vehicle on a suitable stand so that the
rear wheel is elevated.
EAS23240
CHECKING THE REAR SHOCK ABSORBER
ASSEMBLY
1. Check:
• Rear shock absorber rod
Bends/damage → Replace the rear shock
absorber assembly.
• Rear shock absorber
Oil leaks → Replace the rear shock absorber
assembly.
• Spring
Damage/wear → Replace the rear shock ab-
sorber assembly.
• Bushing
Damage/wear → Replace the rear shock ab-
sorber assembly.
• Bolts
Bends/damage/wear → Replace.
EAS23260
CHECKING THE CONNECTING ARMS AND
RELAY ARM
1. Check:
• Connecting arms
• Relay arm
Damage/wear → Replace.
2. Check:
• Bearings
• Oil seals
Damage/pitting → Replace.
3. Check:
• Spacers
Damage/scratches → Replace.
EAS23270
INSTALLING THE RELAY ARM
1. Lubricate:
• Spacers
• Bearings
• Oil seals
• Bolts (unthreaded shaft portion only)
REAR SHOCK ABSORBER ASSEMBLY
2. Install:
• Bearing "1"
(to the relay arm)
• Oil seal "2"
(to the relay arm)
3. Rear shock absorber assembly
4. Relay arm
5. Connecting arm
A. Left side
B. Right side
EAS23310
INSTALLING THE REAR SHOCK
ABSORBER ASSEMBLY
1. Install:
• Rear shock absorber assembly
• Relay arm "1"
NOTE:
Install the relay arm as shown in the illustration.
4-57
Recommended lubricant
Lithium-soap-based grease
Oil seal installed depth "a"
0.5 mm (0.02 in)
a
a
a
a
2
A
5
a
a
1
2
a
a
4
1
2
1
B
5
3
2