Playback Control (Pbc); Power Save Mode; Factory Settings; Dvd Recorder+Vcr User's Guide - Go-Video VR3845 User Manual

General Settings
To Cancel Progressive Scan
If you enable Progressive Scan
accidentally, the picture will be distorted.
To reset the unit:
1
Remove any disc or tape in the unit.
2
Press and hold the STOP button for
5 seconds.

Playback Control (PBC)

PBC stands for Playback Control and
refers to special menus and navigation
features available on some Video CDs.
1
Press SETUP.
2
Select "GENERAL" > "PBC" .
3
Set PBC to "ON" (Video CDs are played
according to the PBC, if available), or
"OFF" ( Video CDs are played the same
way as Audio CDs).

Power Save Mode

Sets the DVD Recorder+VCR to an
economical power saving mode.
1
Press SETUP.
2
Select "GENERAL" > "Power Save
Mode" .
3
Turn Power Save Mode on or
off.

Factory Settings

Restores the DVD Recorder+VCR to its
original factory settings.
1
Press SETUP.
2
Select "GENERAL" > "Factory Set" >
"SET" .
3
Select "Yes" and press ENTER.
• All menu settings will be restored to
their factory defaults.
• Some settings cannot be reset, in-
cluding the Parental Control, Pass-
word, and Area Code settings.
24

DVD Recorder+VCR User's Guide

(continued)
Tuning Band
CH. Add/Del
Clock Set
TV Aspect
Display Mode
Progressive Scan
PBC
Power Save Mode
Factory Set
Tuning Band
CH. Add/Del
Clock Set
TV Aspect
Display Mode
Progressive Scan
PBC
Power Save Mode
Factory Set
Tuning Band
CH. Add/Del
Clock Set
TV Aspect
It initializes the system status.
Display Mode
Continue?
Progressive Scan
PBC
Power Save Mode
Factory Set
OFF
ON
Prev. Select
OFF
ON
Prev. Select
Yes No
Set
Prev. Select