General Settings
Auto Channel Search
Specifies whether the DVD Recorder+VCR
is connected to an antenna or cable TV
source, then automatically searches for all
available TV stations.
1
Press SETUP.
2
Select "GENERAL" > "Tuning Band" .
3
Choose from the following:
TV - Select if you have an antenna.
CATV - Select if you have cable TV.
4
Select "Start" .
• The DVD Recorder+VCR searches
for all available stations.This may
take several minutes to complete.
Adding/Deleting Channels
Allows you to add or delete channels.
1
Press SETUP.
2
Select "GENERAL" > "CH. Add/Del"
>"Edit" .
3
Add or delete channels:
• Use CH or 0-9 to select the
desired channel, then press .
• Press ENTER to add or delete the
selected channel.
Auto Clock Set
Sets the clock automatically whenever
the DVD Recorder+VCR is turned off.
1
Press SETUP.
2
Select "GENERAL" > "Clock Set" >
"Auto" .
3
Choose from the following:
Time Zone - Set your local time zone
to Auto (default), Hawaii, Alaska, Pa-
cific, Mountain Central, or Eastern.
Daylight Savings - Set Daylight Sav-
ing to Auto (default), OFF, or ON.
22
DVD Recorder+VCR User's Guide
Tuning Band
CH. Add/Del
Clock Set
TV Aspect
Display Mode
Progressive Scan
PBC
Power Save Mode
Factory Set
NOTE:
• If you receive channels from a
cable box or satellite receiver,
there is no need to set the Tuning
Band or search for channels.
Ch. 02
0-9 Input
Tuning Band
CH. Add/Del
Clock Set
TV Aspect
Display Mode
Progressive Scan
PBC
Power Save Mode
Factory Set
Prev
TV
CATV
START
Prev
Add
Delete
Return
Auto
Manual
Time
Auto
Zone
Daylight
Auto
Savings
Move
Select