Cisco OptoStar II Installation Manual page 46

Operating using Console Software, Continued
The table below lists the basic parameters of the OptoStar II RF switch module.
Basic Parameter
Module Name and Firmware
Version
Module Temperature
S/N
Rack ID
Slot ID
Alarm Code
OL-29669-01
Description
Shows the module name and its firmware
version
Shows the current module temperature (° C)
Shows module serial number
Shows the ID of the rack where the chassis
is placed
Shows the ID of the slot where the module
is placed
Shows the current module alarm code; See
Alarm Code List (on page 3-13)
Operation
Continued on next page
3-19