Table of Contents
Advertisement
Operating using Console Software, Continued
3. When the device initialization is complete, connect the Mini-USB side of the
USB cable provided with the ICIM to the Mini-USB interface of the ICIM front
panel. The other side of the USB cable should be connected to the USB
interface on the PC. Now the LCD screen shows USB connected, and the
keypads below the LCD screen are temporarily unavailable. The illustration
below shows the connection method.
4. Install and start the OptoStar II console software. See Cisco OptoStar II
Console Installation and Operation Guide, P/N OL-29664 for detailed
installation procedures.
OL-29669-01
Operation
Continued on next page
3-15
Advertisement
Table of Contents
Troubleshooting
