Specifications / Technische Daten; Specifications - Electro-Voice Precision CP3000S Owner's Manual

SPECIFICATIONS

- Amplifier at rated conditions, both channels driven, 8
Load Impedance
Maximum Midband Output Power
THD = 1%, 1kHz, Dual Channel
Rated Output Power
THD < 0.1%, 20Hz ... 20kHz
Max. Single Channel Output Power
Dynamic-Headroom, IHF-A
Max. Single Channel Output Power
Continuous, 1kHz
Max. Bridged Output Power
THD = 1%, 1kHz
Maximum RMS Voltage Swing
THD = 1%, 1kHz
Power Bandwith
THD = 1%, ref. 1kHz, half power @ 4Ω
Voltage Gain
ref. 1kHz
Input Sensitivity
at rated output power
THD at rated output power,
MBW = 80kHz, 1kHz
IMD-SMPTE
60Hz, 7kHz
DIM30
3.15kHz, 15kHz
Maximum Input Level
Crosstalk
ref. 1kHz, at rated output power
Frequency Response
-1dB, ref. 1kHz
Input Impedance
active balanced
Damping Factor
1kHz
Slew Rate
Signal to Noise Ratio, Amplifier
A-weighted
Output Stage Topology
Power Requirements
Power Consumption
1/8 maximum output power @ 4Ω
Protection
Cooling
Ambient Temperature Limits
Safety Class
Dimensions
(W x H x D), mm
Weight
Optional:
Rear-rackmount 15,5"
Rear-rackmount 18"
Notes:
- Depending on the ambient temperature, the unit might not operate continuously at 2Ω load.
- Due to mains voltage in Japan (100V/50Hz) the values for the maximum output power can be decreased up to 10% (only
100V version)!
Ω loads, unless otherwise specified.
CP3000S
2Ω
1600W
--
2600W
2100W
--
10Hz ... 60kHz
+5.8 dBu (1.51 V rms)
+22dBu (9.76 Vrms)
< - 80dB
15Hz ... 40kHz
240, 230, 220, 120V or 100V; 50Hz ... 60 Hz (factory configured)
Audio limiters, High temperature, DC, HF, Back-EMF,
Peak current limiters, Inrush current limiters, Turn-on delay
Front-to rear, 3-stage-fans
+5°C ... +40°C ( 40°F ... 105°F)
483 x 88,1 x 386,8
8.15 kg (18.0 Ibs)
(NRS 90262) 112930
(NRS 90264) 112933
30
4Ω 8Ω
1100W 600W
900W 450W
1400W 720W
1300W 660W
3200W 2200W
78V
32,0 dB
< 0.05%
< 0.02%
< 0.05%
20kΩ
> 300
35 V/ms
107 dB
Class H
820W
I