IMPORTANT SAFETY INSTRUCTIONS The lightning fl ash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage“ within the product’s enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in...
At the same time this contributes to a reduction in weight and power dissipation. The CP1800/CP2200 is designed in Class-H technology (CP1200 Class-AB), i.e. the power amp provides extremely fast, signal-dependent operating voltage switching, which results in doubling the regular supply voltage when needed.
DESCRIPTION UNPACKING & WARRANTY Carefully open t he packaging and take out the power amplifi er. Next to the power amplifi er itself, the package also includes this owner’s manual, a mains cord and the warranty certifi cate. Keep the original invoice, which states the purchase/delivery date together with the warranty certifi...
FRONT PANEL Use the POWER switch, located on the front panel’s, right side to switch the appliance’s power on. The soft-start function limits against current inrush peaks on the mains, which in addition prevents the mains line protection switch from activating during power-on. The loudspeaker outputs are activated via relay switching with a delay of approximately 2 seconds to effi...
If external voltage limiters are used, they should be set to the used power class with consideration of the connected speaker systems. The XLR-type CP1200 +1.15dBu / 0.88V connectors OUTPUT A & OUTPUT B are prepared for „through- CP1800 +3.2dBu / 1.12V connecting“...
REAR PANEL POWER AMP OUTPUT CONNECTORS Power amp output connection for the two channels A (left) and B (right) is provided via SPEAKON-type output connectors. A plastic cover to prevent inadvertent erroneous connection protects the BRIDGED OUT connector. Make sure to remove the cover only when actually operating the power amplifi...
Page 9
The column „Pd“ lists the leakage power in relation to different operational states. The column „BTU/ hr“ lists the dispensed heat amount per hour. CP1200 BTU/hr mains mains...
Page 10
MAINS OPERATION & RESULTING CP2200 BTU/hr mains mains mains idle 230V Max. Output Power @ 8Ω 230V 1440 2 x 500 1500 Max. Output Power @ 4Ω 230V 13,2 2520 2 x 800 3140 1/3 Max. Output Power @ 4Ω 230V 1360 2 x 266...
Need help?
Do you have a question about the Precision CP1200 and is the answer not in the manual?
Questions and answers