Bt Call Sign (For U.k. Only) - Brother MFC-240C User Manual

Note
You can program a Tel/R key press as
part of a number stored in a Speed-Dial
location. When programming the Speed-
Dial number (Menu, 2, 3, 1 or 2, 3, 2)
press Tel/R first (the screen displays "!")
then enter the telephone number. If you do
this, you do not need to press Tel/R each
time before you dial using a Speed-Dial
location. (See Storing Speed-Dial
numbers on page 41.) However, if PBX is
not selected in the Phone Line Type
setting, you cannot use the Speed-Dial
number that Tel/R press is programmed
into.

BT Call Sign (For U.K. only)

This machine feature lets you use the BT Call
Sign subscriber service which allows you to
have at least two separate telephone
numbers on one phone line. Each phone
number has its own distinctive ringing
pattern, so you know which phone number is
ringing. This is one way you can have a
separate phone number for your machine.
Your machine has a BT Call Sign compatible
distictive ringing functions, allowing you to
dedicate a second phone number (on the
same phone line) just for receiving faxes.
Telephone and External devices
Note
• You can switch BT Call Sign off
temporarily, then turn it back on. When
you get a new fax number, make sure you
reset this function. This machine will
automatically answer incoming calls that
use your new fax number.
• When you set the BT Call Sign feature to
ON, the receive mode is set to Manual
automatically. Manual mode will not
respond to incoming telephone calls,
since the number you use for telephone
calls will use the normal ring pattern.
To enable the machine to work with BT
Call Sign (With your external phone
only)
7
a
Press Menu, 2, 0, 3.
0.Miscellaneous
3.BT Callsign
b
Press a or b to choose On (or Off).
Press OK.
c
Press Stop/Exit.
Note
If you turn off BT Call Sign, the receive
mode stays in Manual. You will need to
set receive mode again. (See Choosing
the Receive Mode on page 30.)
7
7
35