Table of Contents
Advertisement
Pyrolytic cleaning
1
Caution! The oven becomes very hot during
this process. All young children must be kept
at a safe distance.
1
Important! All removable parts including the
side rails must be removed from the oven be-
fore using the pyroluxe function.
3
If you are using any other removable oven ac-
cessories, these must be removed before the
pyrolytic cleaning process. If the oven shelf
runners are still in position, the temperature
control light flashes. The pyroluxe process
then cannot be started due to a safety cut-
out that protects the oven shelf runners.
1. Remove any large pieces of dirt by hand.
2. Set the Oven Function selector to P Pyrolysis.
3. Turn the temperature selector to the right until it
comes to the end stop. Pyrolysis will start after a
few seconds, and will switch itself off automatically
after 2 hours and 30 minutes.
3
During the process, the oven door is locked
and oven lighting is off. The temperature indi-
cator light remains on until the door is re-
leased.
4. When the pyrolytic process is completed, turn all
controls to the Zero position.
5. After it has cooled down, wipe the oven with a soft
cloth.
Oven Lighting
1
Warning: There is a danger of electric shock!
Prior to changing the oven light bulb:
– Switch off the oven!
– Remove the fuses in the fuse box or switch off the
circuit breaker.
3
Place a cloth on the oven floor to protect the
oven light and glass cover.
Replacing the oven light bulb/cleaning
the glass cover
1. Remove the glass cover by turning it anti-clock-
wise and then clean it.
2. If necessary:
Replace bulb with a 40 watt, 230 V, 300 °C heat-
resistant oven light bulb.
3. Refit the glass cover.
32
Advertisement
Table of Contents
