Chicco NextFit User Manual page 37

INSTALL USING LAP-SHOULDER BELT
8
Locate Tether anchor in your vehicle. Attach Tether Hook.
Pull Tether Adjuster strap to tighten.
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull

side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1" (25 mm) from vehicle seat back or side-to-side.

Make sure Bubble is between lines on label for FORWARD-FACING use. If
necessary, loosen the vehicle belt and Tether, re-adjust recline and repeat
installation steps to make sure Child Restraint is installed properly.

Check installation before every use!
70
INSTALL USING LAP-SHOULDER BELT
8
71