Using System Options; Bypass; Door Chime - BRINKS DCU-500 Manual

USING SYSTEM OPTIONS

The system has five options: BYPASS, DOOR CHIME, AUXILIARY CODES,
ALARM MEMORY, and TEST.
You may select any option by pressing and holding for 3 seconds the
button that corresponds with the option you want.

1 = Bypass

3 = Auxiliary Code

2 = Door Chime

4 = Memory
If you select a feature in error, you may cancel the selection by pressing
CANCEL.
This option allows you to bypass a trouble zone or a specific zone of your
choice. When bypassed, the system ignores the specified zone.
1. Press and hold the "1" key for 3 seconds. All the keypad's lights
will go off.
2. Enter the zone number. The zone light will go on when you enter
the number.
3. The system can then be turned on by pressing ON. The BYPASS
option can also be used with the Door Chime option described
below. The green ready light will flash on and off until the system is
turned off.
NOTE: The BYPASS feature is automatically canceled when the
system is turned off with a valid user code.
This feature is used when the system is off to let you know when a protected
door or window has been opened. When a door or window is opened, you
are alerted by a beep from the keypad.
1. Press and hold the "2" key for 3 seconds.
2. The keypad will beep.
3. Press CANCEL
canceled when the system is turned on.
5 = Test Communications
6 = Test Sensor
BYPASS
DOOR CHIME
to turn off this feature, or it will automatically be
11