FBII OMNI-600EU User Manual page 5

The following table lists the "Quick Commands" available with this control.
Key
# 1 Quick Arm – if system is ready
Force Arm – bypasses faulted
# 2
zones
Quick Bypass
BYPASS
nn (zone no.)
Set Time and Date
# 3
Zone Directory
# 4
Quick Help
# 50
Show Time and Date
# 51
Show Auto Arm Time
# 52
User Event Log View
# 53
Set Auto Arm Time
# 54
Display Firmware Version
# 55
Door Strike
# 57
Change/View Pager Number
# 58
Display/Toggle Chime Mode
# 6
User Page Toggle
# 8
User On-line
# 9
Description
* 2-line alpha display
Quick Reference (Cont'd)
Keypads Comments
All keypads Allows you to arm the system without
requiring your user code. User code is
always needed to disarm the system.
All keypads Allows you to arm the system even if
some zones are faulted. These zones will
be automatically bypassed and will be
unprotected.
All keypads If not enabled, requires user code with
authority 1, 2, or 3.
All keypads May require user code.
LCD* only Lists each zone with its descriptors. Mode
terminates after last enabled zone.
LCD* only Provides a listing of all quick commands
available in the system.
LCD* only May also require code.
LCD* only May also require code.
LCD* only Also needs user code with authority level
1 or 2.
All keypads May also require code.
LCD* only Displays panel's revision.
All keypads Activate doorstrike or trigger. May
require certain user code.
All keypads For keypad, only LCD* shows phone
number. May also require code.
All keypads LCD* displays current state first, then
offers to toggle. All others just toggle the
state.
All keypads Toggles if users should send page for
Open/Close.
All keypads Connects to downloader while on line,
disconnects home phone.
- 5 -