Related Manuals for GMC Sand Kat KAT150A
Summary of Contents for GMC Sand Kat KAT150A
- Page 1 INSTRUCTION MANUAL 125W Detail Sander • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris KAT150A 031223 ED4 DR...
-
Page 2: Table Of Contents
General safety instructions Additional safety rules for sanders Accessories Know your product Unpacking Assembly Operation Turning your sander on Fitting sandpaper Sanding Cleaning General inspection Power cord maintenance Full 2 Years Home Use Warranty Whilst every effort is made to ensure your complete... -
Page 3: Dear Customer
Dear Customer If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand. -
Page 4: General Safety Instructions
General safety instructions Warning. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read and heed the advice given in the additional important safety instructions. 1. -
Page 5: Additional Safety Rules For Sanders
• Only use good quality sandpaper. • Do not force the sander; let the tool do the work at a reasonable feed speed. Overloading will occur if too much pressure is applied and the motor slows resulting in inefficient sanding and possible damage to the sander motor. -
Page 6: Accessories
• Always remove the plug from the mains socket before making any adjustments or maintenance, including changing the sandpaper. Accessories The GMC KAT150A Sand Kat Sander is supplied with the following accessories as standard: • Dust extraction adaptor • 4 x 60 grade sandpaper sheets •... -
Page 7: Know Your Product
Know your product The sander is designed for sanding wood, metal, plastic and similar materials. It is a finishing sander and should be used only when giving a surface a final sanding. As the base is reasonably small, the sander is suited for accessing tight corners that larger sanders are unable to reach. -
Page 8: Operation
3. Switch the sander on whilst it is resting on the workpiece. Take care to hold the whole area of the platen on the work. 4. Move the sander over the surface of the work in a circular motion with an even, moderate pressure. Caution. -
Page 9: Cleaning
3. Never use caustic agents to clean plastic parts. CAUTION. Do not use cleaning agents to clean the plastic parts of the sander. A mild detergent on a damp cloth is recommended. Water must never come into contact with the sander. - Page 10 Carefully read the entire Instruction Manual Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: •...
Need help?
Do you have a question about the Sand Kat KAT150A and is the answer not in the manual?
Questions and answers