Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GMC ROS400A
Summary of Contents for GMC ROS400A
- Page 1 400W RANDOM ORBITAL SANDER ROS400A INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
Additional safety rules for sanders Contents of carton Unpacking Assembly Know your product Switching on and off Using the sander Adjusting the speed Fitting a sanding sheet Selecting the right grade of sandpaper Adjusting the front handle Dust extraction Maintenance... -
Page 3: Introduction
4000-12500 min Sandpaper type: Hook and loop Random orbital sanding sheet size: Ø125mm Weight: 2.2kg Sound pressure value: 84dB(A) This sander is double insulated. There are two independent barriers of insulation to protect you from the possibility of electric shock. -
Page 4: General Safety Rules
General safety rules WARNING. Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. -
Page 5: Additional Safety Rules For Sanders
After long working periods external metal parts and accessories could be hot. • Do not force the sander; let the tool do the work at a reasonable speed. Overloading will occur if too much pressure is applied and the motor slows resulting in inefficient sanding and possible damage to the sander motor. -
Page 6: Contents Of Carton
Contents of carton The GMC ROS400A Random Orbital Sander is supplied with the following accessories as standard: • 5 x 80 grit hook & loop sanding sheets • Dust bag • Instruction manual Unpacking Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. -
Page 7: Know Your Product
Know your product 1. Adjustable front handle 2. Front handle lock 3. Sanding base (platen) 4. On/off trigger switch 5. Lock-on button 6. Variable speed controller 7. Washable dust bag 8. Dust extraction port 9. Rear handle... -
Page 8: Switching On And Off
Ensure any sanding grit residue is completely cleaned from the sander and platen before using as a polisher. If grit is present when polishing it can scratch the work surface. The manufacturer takes no responsibility for scratches resulting from sanding grit residue. -
Page 9: Selecting The Right Grade Of Sandpaper
Adjusting the front handle The front handle on this sander can be adjusted to suit the needs of the operator and the job. 1. To adjust the front handle loosen the front handle lock (2) enough so that you can easily move the handle into the desired position. -
Page 10: General Inspection
General Inspection Regularly check that all the fixing screws are tight. They may vibrate loose over time. Power cord maintenance If the supply cord needs replacing, the task must be carried out by the manufacturer, the manufacturer’s agent, or an authorised service centre in order to avoid a safety hazard. - Page 12 GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservice.com.au.