Subscribe to Our Youtube Channel
Related Manuals for GMC SA120
Summary of Contents for GMC SA120
- Page 1 INSTRUCTION MANUAL Detail Sander • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris SA120 050526 ED3 JJ...
-
Page 2: Table Of Contents
Contents Warranty Introduction Environmental protection Description of symbols Specifications Safety instructions Additional safety rules for sanders Contents of carton Know your product Unpacking Switching on and off Adjusting the speed Changing and rotating the sanding base Selecting the right grade of sandpaper Attaching a sanding sheet Sanding Dust extraction... -
Page 3: Introduction
Dear Customer If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand. -
Page 4: Safety Instructions
Safety instructions WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. -
Page 5: Additional Safety Rules For Sanders
After long working periods external metal parts and accessories could be hot. • Do not force the sander; let the tool do the work at a reasonable speed. Overloading will occur if too much pressure is applied and the motor slows resulting in inefficient sanding and possible damage to the sander motor. -
Page 6: Contents Of Carton
• Before using the sander with metal always remove the extraction filter from the outlet as sparks may ignite the dust or the internal bag. • Do not continue to use worn, torn or heavily clogged sanding sheets. • Do not touch the moving sanding sheet. -
Page 7: Know Your Product
Know your product 1. Main handle 2. Body 3. On/off switch 4. Rotatable base 5. Variable speed control 6. Vacuum dust extraction port 7. Allen key 8. Finger sanding extension 9. Dust extraction adaptor... -
Page 8: Unpacking
3. Do not switch on the tool when the sanding surface is on the work. NOTE. Always lift the sander from the work before switching off. Adjusting the speed The speed can be adjusted to suit the material being sanded. -
Page 9: Selecting The Right Grade Of Sandpaper
WARNING. Do not continue to use the sander with a sanding sheet that is over worn or damaged. WARNING. Do not use the same sanding sheet for wood and metal. Metal particles become embedded in the sandpaper and will scour a wooden surface. -
Page 10: Maintenance
Maintenance WARNING. Always ensure that the tool is switched off and the plug is removed from the power point before making any adjustments or maintenance procedures. Keep the tool’s air vents unclogged and clean at all times. Regularly check to see if any dust or foreign matter has entered the grills near the motor and around the on/off switch. - Page 12 Carefully read the entire Instruction Manual Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: •...
Need help?
Do you have a question about the SA120 and is the answer not in the manual?
Questions and answers