Related Manuals for GMC SA350
Summary of Contents for GMC SA350
- Page 1 INSTRUCTION MANUAL 1/2 Sheet Orbital Sander • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris SA350 050526 ED4 JJ...
-
Page 2: Table Of Contents
Contents of carton Know your product Unpacking Switching on and off Adjusting the speed Adjusting the front handle Using the sander Selecting the right grade of sandpaper Attaching a sanding sheet Using the hole punch Dust extraction Maintenance General inspection... -
Page 3: Introduction
Dear Customer If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand. -
Page 4: Safety Instructions
Safety instructions WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. -
Page 5: Additional Safety Rules For Sanders
After long working periods external metal parts and accessories could be hot. • Do not force the sander; let the tool do the work at a reasonable speed. Overloading will occur if too much pressure is applied and the motor slows resulting in inefficient sanding and possible damage to the sander motor. -
Page 6: Contents Of Carton
• Before using the sander with metal always remove the extraction filter from the outlet as sparks may ignite the dust or the internal bag. • Do not continue to use worn, torn or heavily clogged sanding sheets. • Do not touch the moving sanding sheet. -
Page 7: Know Your Product
Know your product 1. On/off switch 2. Main handle 3. Dust extraction canister 4. Hook & loop base 5. Paper clamp 6. Variable speed control 7. Front handle 8. Handle lock 9. Hole punch 10. Dust extraction adaptor 11. Sandpaper (2 x 80G) -
Page 8: Unpacking
2. Grip the main handle in one hand and push down on the front of the handle with the other hand. 3. Take care to hold the sander parallel to the work, and use only moderate pressure. 4. If there are still marks on your work after sanding,... -
Page 9: Selecting The Right Grade Of Sandpaper
(9) provided. 1. Place the hole punch on a level surface. 2. After fitting the sandpaper to the sander align the base of the sander with the hole punch and push down on the sander until the hole punch pierces the sandpaper. -
Page 10: Maintenance
WARNING. For optimum dust extraction, remove and empty the canister when it is no more than half full. Do not use the canister when sanding metal. The hot metal particles could cause residual wood dust or the internal bag itself to catch fire. - Page 12 Carefully read the entire Instruction Manual Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: •...