Related Manuals for GMC BS800
Summary of Contents for GMC BS800
-
Page 1: Belt Sander
I N S T R U C T I O N M A N UA L 800 Watt Belt Sander • London • Melbourne • Perth • Taipei • Verona • Hong Kong • New York • Auckland • Paris BS800 031222 ED5 DR... -
Page 2: Table Of Contents
Contents Warranty Introduction Specifications General safety instructions Additional safety rules for sanders Unpacking Assembly Know your product Switching on and off Attaching a sanding belt Selecting the right grade of sanding belt Sanding Dust Extraction General Inspection Cleaning Repairs Full 2 Years Warranty Whilst every effort is made to ensure your complete sat- isfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our... -
Page 3: Warranty
Dear Customer If you require any help with your product, whether it is a Warranty claim, spare part or user information: Please phone our Help Line for an immediate response. The appropriate number is given on the rear page of this manual. - Page 4 1. Keep the work area clean and tidy. areas and benches invite accidents and injury. 2. Consider the environment in which you are working. Do not use power tools in damp or wet locations. Keep the work area well lit. Do not expose power tools to rain.
-
Page 5: Additional Safety Rules For Sanders
Always switch off before you put the sander down. • Do not force the sander; let the tool do the work at a reasonable speed. Overloading will occur if too much pressure is applied and the motor slows resulting in inefficient sanding and possible damage to the sander motor. -
Page 6: Assembly
Assembly The Sander is packed, fully assembled. Know your product 1. Front handle 2. Main handle 3. Dust collection bag 4. Lock on button(not shown) 5. On/Off switch 6. Drive roller 7. Sanding belt tension lever 8. Front belt roller 9. -
Page 7: Switching On And Off
Switching on and off 1. Pull the on/off trigger (5) upward to start the sander. 2. Release the trigger to turn off the sander. 3. By pulling the trigger on and pressing the lock on button (4), you can lock the sander on. Pulling the switch on again and releasing it turns the switch off. -
Page 8: Sanding
After sanding with a belt sander, an orbital sander should be used to give a better surface finish. Sanding 1. The sander is designed for sanding wood, metal, plastic and similar materials. It is used mainly for quickly removing a large amount of material. Do not use this sander for sanding magnesium. -
Page 9: Cleaning
3. Re-lubricate all moving parts at regular intervals. 4. If the body of the sander needs cleaning, wipe it with a soft damp cloth. A mild detergent can be used but nothing like alcohol, petrol or other cleaning agent. - Page 10 Carefully read the entire Instruction Manual Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: •...