Setting Up Your Digital Picture Frame - Dynex DX-DPF7-10 User Manual

8
# Button
3 (prev),
(up),
ROTATE
4 MODE/ENTER
5 COPY/DEL
6 ZOOM
7 SLIDE SHOW
Setting up your digital picture
frame
Installing the remote control battery
Note: A battery comes pre-installed in your remote control. To
activate the battery, remove the plastic insulating sheet from
the battery tray.

Setting up your digital picture frame

(next), Press
(down)/ menus or to go to the previous picture.
Press
menus or to go to the next picture.
Press
menus.
Press
the on-screen menus or to rotate a picture.
In picture mode, press to toggle between
slideshow, browse, and thumbnail views.
In menu mode, press to confirm a selection.
Press to copy a picture from an inserted memory
card into the frame's internal memory, or to delete
a picture from the frame's internal memory.
Press to zoom in on an image.
Press to start a slideshow.
Description
(prev) to navigate left in the on-screen
(next) to navigate right in the on-screen
(up) to navigate up in the on-screen
(down)/ ROTATE to navigate down in