Table of Contents
Advertisement
4 Insert battery
(for back-up only)
By following the instructions below,
open the battery compartment on
your Response 65 Caller Display
and fit an alkaline PP3 9V battery
(not supplied). This will provide up
to 6 hours back-up, and will ensure
that messages are not lost in the
event of a power failure.
To open the battery compartment,
insert a screwdriver (or similar) into
the slot in the battery compartment
cover on the underside of your
Response 65 Caller Display, and
gently press down. This will release
the latch and allow you to remove
the cover.
9V
Insert the battery.
Replace the battery cover.
In the event of a power failure, the
back-up battery prevents your
Response 65 Caller Display from
losing its call information, day and
time settings, outgoing message
and any messages which have
already been recorded.
Warning
As with all telecommunications
apparatus, there is a slight chance
that your Response 65 Caller
Display could be damaged by an
electrical storm.
We recommend you unplug the
unit from the mains during
storms.
Setting up
7
Advertisement
Table of Contents
