Outgoing Message - BT RESPONSE 65 User Manual

• When you hear the correct hour,
release the TIME button.
Your Response 65 Caller
Display announces the hour you
have set.
You can now set the current
minutes.
• Press and hold the TIME button
again. Your Response 65 Caller
Display will announce the
currently set minutes.
• Still pressing the TIME button,
press the and
skip forward and backward
through the minutes.
• When you hear the correct
minutes, release the TIME
button. Your Response 65 Caller
Display announces the day and
time you have set.
Your Response 65 Caller Display
now returns to ANSWER ON.
To check the day and time
setting
TIME
• Press the TIME button. Your
Response 65 Caller Display will
announce the currently set day
and time.
Your Response 65 Caller Display
announces the time, using the 12-
hour clock. Be sure to hold down the
or buttons long enough for
your Response 65 Caller Display to
say whether it is
buttons to
or .
AM PM
Using the answering machine
Recording your

outgoing message

The outgoing message is what a
caller hears when your Response 65
Caller Display answers a call.
Your Response 65 Caller Display
has a pre-recorded outgoing
message which announces. 'Hello,
your call cannot be taken at the
moment, so please leave your
message after the tone. ' This
message remains in the memory
and cannot be deleted. You can,
however, record your own outgoing
message to replace it.
Your Response 65 Caller Display
has a total recording capacity of 14
minutes for outgoing messages,
incoming messages and memos.
Your outgoing message can be as
long as you wish. We do, however,
recommend that you keep it brief to
allow more time for recording
incoming messages.
To record your own outgoing
message
• Press and hold the OUTGOING
MESSAGE button. Your
Response 65 Caller Display
beeps and the display flashes 'r'.
13