BT RESPONSE 65 User Manual page 15

Using the answering machine
• You can now record your
outgoing message. Speak clearly
15 to 20 cm from the in-built
microphone. Make sure you hold
down the OUTGOING MESSAGE
button while you record the
entire message.
Your Outgoing Message may sound
something like this: 'Hello, I'm
sorry I can't take your call at
present. If you would like to leave a
message, please speak after the
tone. '
• When you have recorded your
message, release the
OUTGOING MESSAGE button.
• You will hear a beep.
• Your Response 65 Caller Display
will automatically play back your
message, then beep to confirm
the recording.
• Your Response 65 Caller Display
then returns to ANSWER ON.
• The display shows '0' , or the
number of messages recorded.
To re-record your outgoing
message, repeat this procedure.
14
To check your outgoing
message
OUTGOING
MESSAGE
• Press the OUTGOING
MESSAGE button. Your
Response 65 Caller Display
beeps and your outgoing
message is played back to you.
• You will hear a beep.
• Your Response 65 Caller Display
then returns to answer-on mode.
To delete your outgoing
message
You can delete your outgoing
message and return to your
Response 65 Caller Display's pre-
recorded outgoing message.
OUTGOING
DELETE
MESSAGE
• Press the OUTGOING
MESSAGE button,You will hear
a beep. Your outgoing message
is played back to you.
• While the message is playing,
press the DELETE button.
• Your Response 65 Caller Display
beeps and the pre-recorded
outgoing message is played
back.
Your message is now replaced by
your Response 65 Caller Display's
pre-recorded outgoing message.