Table of Contents
Advertisement
To delete all messages
MESSAGES
8
Following playback of messages,
your Response 65 Caller Display's
display will count down from 8 to 0.
During this time you can delete all
the stored messages.
DELETE
• Press the DELETE button while
the display is counting down
from 8 to 0. Your Response 65
Caller Display will announce 'all
messages deleted'.
Your Response 65 Caller Display
then continues the count down
from 8 to 0, followed by a 'd' before
returning to answer-on mode.
To delete individual messages
• Press the PLAY button to
play back your messages.
• When the message you wish to
delete is playing, press the
DELETE button. Your Response
65 Caller Display announces
'message deleted'.
• Repeat this procedure to delete
any further messages.
If you press the STOP button at
any time during the countdown, all
messages will be saved.
PAUSESTOPON / OFFMEMOPLAY
DELETE
Using the answering machine
Setting the answer
delay
Answer delay sets the number of
times your Response 65 Caller Display
will ring before answering a call.
Time saver
Your Response 65 Caller Display is
pre-set to TIME SAVER. This
means that during remote access
if any incoming messages have
been received, your Response 65
Caller Display will answer after
only 2 rings. If there are no
messages it will ring 6 times,
allowing you to hang up before the
call is answered.
To change the answer delay
• Press and hold the
Your Response 65 Caller Display
announces the current answer
delay setting, whilst the
messages LED will display the
number.
• Keep holding the
Your Response 65 Caller Display
announces the answer-delay
options: 'TIME SAVER, 2, 3, 4,
5, 6, 7, 8, 9'.
Display shows
• When you hear your desired
setting, release the
After 2 seconds your Response
65 Caller Display announces the
new answer delay setting and
returns to ANSWER ON.
button.
button.
= Time Saver.
button.
17
Advertisement
Table of Contents
