BT RESPONSE 65 User Manual page 21

Using the answering machine
• Enter your security code using
the keypad. If the correct code
is entered, your Response 65
Caller Display announces: 'You
have X messages' and starts to
play them.
When you enter your security code,
you will hear a confirmation beep
after entering the first digit.
You can now play back, delete or
skip forward and backward through
your messages, using the keypad as
follows:
2 - Play or pause/resume playback
of messages.
5 - Delete individual messages
during playback or all messages
at the end of message playback.
4 - Skip backward through
messages.
6 - Skip forward through messages.
As your Response 65 Caller Display
plays back messages or memos, it
will announce the day and time they
were recorded.
If you pause during playback of
messages, your Response 65 Caller
Display will beep every 10 seconds.
If you do not resume playback
within 60 seconds, your Response
65 Caller Display announces
'Thank you for calling' and returns
to ANSWER ON.
20
During remote access you can skip
forward and backward through
messages as many times as you like.
However, your Response 65 Caller
Display will only allow messages to
be played back in full 3 times. It will
then announce: 'Thank you for
calling' and return to ANSWER ON.
To save all incoming messages
and memos replace the handset.
Messages are saved and your
Response 65 Caller Display returns
to ANSWER ON.
If you have no messages, you will
hear the announcement: 'You have
no messages. '
Using the stop button
Pressing the STOP button will
cancel any function currently in
progress.
After pressing the STOP button
your Response 65 Caller Display will
return to ANSWER ON.