Table of Contents
Advertisement
125981560.qxp
2005-09-08
12:50
To select the requested humidity degree press the
"Change" button repeatedly.
When on the display appears:
Increased Dry
You has choosen the medium degree of drying.
Drying cycle time will increase by approx. 3
min.
Very Dry
Provides the highest degree of drying. Drying
cycle time will increase by approx. 6 min.
Reduced Dry
Provides the lowest degree of drying. Drying
cycle time will decrease by approx. 2 min.
To confirm your choice press «Exit».
This option cannot be selected with Quick
option
.
No Buzzer
A buzzer sounds:
when selecting the programme
●
●
when an incorrect option selection is made
when the programme selector dial is turned to
●
another position during the programme or when
you press an option button during the cycle
●
at the end of the programme
when the water reservoir is full
●
●
if the machine is not working correctly
when the small door at the bottom is open.
●
By selecting this option, pressing "Change" button,
the acoustic signal is switched off:
at the end of the programme
●
when the water reservoir is full
●
●
if the machine is not working correctly
when the small door at the bottom is open.
●
To confirm this option press "Exit" button.
Set Up menu:
Menu option is used for selecting various basic
settings without affecting the particular drying
programme. These basic settings will remain active
until they are deselected/modified.
To move through the different Menu settings use the
"Options" button. To change/confirm the selected
setting use the "Change" button.
Page 11
11
Memory
Programme settings that are frequently used can be
saved. There are 2 memory spaces available for this
purpose. The saved programme can be selected in
the same way as any other drying programme by
means of the selector dial.
Example: Cotton Extra Dry, 1200 rpm, No Buzzer
and Dry Level option).
1. Select the cycle and programme settings.
2. Enter the Menu option and select one of the
memory positions. «Store programme?»
message will appear in the display.
3. To memorise the selected programme press the
"Change" button. «Stored» message will appear
in the display.
To change the memorised programme setting repeat
the procedure from the beginning.
Advertisement
Table of Contents
