Table of Contents
Advertisement
125981560.qxp
2005-09-08
12:50
If you open the door during a programme, in order to
restart the programme you must press the
Start/Pause button
door. The
icon appears on the display above the
Wet button.
The first option
(Half Power) will start flashing. Its
name and status will appear on the display.
If you want to change the option status, press
"Change" button. A line will appear below the
selected icon, indicating that the option is set.
To select the other options press again the "Options"
button and proceed as before.
Once you have completed the selection of the
options, press the "Exit" button, the selected icons
will remain fixed on the display.
Note: To modify the already chosen option
selections, repeat the previous procedure.
Important! While selecting the option, if you press
the "Spin Speed"or Start/Pauze button, or you turn
the selector dial, the relative function will be
executed.
Half Power
Selecting this option allows drying to be performed
at a lower temperature, for delicate items.
The corresponding
during set up mode and the drying cycle.
A dash is shown under the relative icon to indicate
that the option has been selected.
This option can also be used for time controlled
drying.
This option cannot be selected with Quick Dry
Quick
By selecting this option the drying time is reduced
with the following Wet Level of the COTTON
programme:
●
EXTRA DRY
STRONG DRY
●
CUPBOARD DRY
●
This option cannot be selected with Half Power
and Dry Level
option.
Delay Start
This option makes it possible to delay the starting of
the drying programme by 30 min - 60 min - 90 min,
2 hours and then by 1 hour till 20 hours. You can
modify the status of the delay pressing the
"Change" button sequentially. The delay you have
selected is indicated in the display.
Page 10
again after having closed the
icon appears on the display
.
You must select this option after you have set the
programme and before you press the Start/Pause
button.
You can cancel the delay time at any moment,
before you press the Start/Pauze button. If you have
already pressed the Start/Pause button and you
wish to cancel the delay time proceed as follows:
1. set the dryer to PAUZE by pressing the
Start/Pauze button;
2. deselect the Delay start option, changing the
status;
3. press the Start/Pauze button to start the
programme.
Important!
The selected delay can be changed only after
selecting the drying programme again.
If you wish to load other laundry to be dried after
having selected the delay time option:
- open the door
- load your laundry
- press the START/ PAUZE button, after having
closed the door.
Half Load
This option can be selected when the load inside
the drum is less or equal to the half load weight
declared by the programme selected.
This option will decrease the duration of the drying
phase and it allows you to save energy.
This option can be selected only with Cotton,
Cotton Quick, Jeans and Synthetic programmes.
Long Anticrease
To be used when you are not able to remove your
dried laundry just after the end of the drying cycle.
Selecting this option the anticrease phase will be
prolonged by an hour.
Dry Level
Selecting Dry Level option, you can choose 3
different degrees of humidity that your laundry
retains.
10
Advertisement
Table of Contents
