BT IN TOUCH 2000 User Manual
Hide thumbs Also See for IN TOUCH 2000:

Advertisement

Quick Links

User Guide
BT IN TOUCH 2000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IN TOUCH 2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for BT IN TOUCH 2000

  • Page 1 User Guide BT IN TOUCH 2000...
  • Page 2: At A Glance

    BT In Touch 2000 Pendant receiver aerial Aerial receives the Pendant signal to remotely activate the emergency sequence or automatically answer an incoming call in handsfree. At a glance Calls button* Use to access the Calls List (the list of numbers that have called you).
  • Page 3 Secrecy person on the other end of the line hearing your conversation. Recall button Use with some BT Calling Features and for transferring calls on certain switchboards. Announce button (under Quickdial memory label) Announce Use to listen to messages and to record your own personal message (via the handset).
  • Page 4: Table Of Contents

    Quickdial and Directory in the caller’s home in the event of an Directory emergency To use your Cancel button Optional settings of the BT In Touch 2000 Returning your BT In Touch 2000 to Desk and wall-mounted its factory settings phone positions...
  • Page 5: Introduction

    Introduction You can expect your BT In Touch 2000 to provide Unpacking your BT In Touch 2000 many years of quality service. Please read the instructions carefully before use and keep this user Check that your BT In Touch 2000 is complete.
  • Page 6: Safety

    Safety information Use the power adaptor and the Do not use the BT In Touch 2000 batteries supplied. Spare batteries and in damp, humid conditions such power adaptors are available from the as bathrooms. Helpline on 0845 6011 406. The power adaptor item code is: 870629.
  • Page 7: Setting Up Your Phone

    The phone should be within 2 metres of a phone socket. Open the battery cover on the underside of your BT In Touch 2000. Insert the 6 x AA Alkaline batteries. Warning Your BT In Touch 2000 is only designed to operate Please note in a normal domestic environment.
  • Page 8 Plug the power cable into the socket on the This should be done before you attach the base underside of your BT In Touch 2000 as shown. stand for either raised or wall-mounted positions. The cable needs to be pressed in to its channel to keep it out of the way.
  • Page 9 Positioning your BT In Touch 2000 Setting time and date (with Caller Display) Your BT In Touch 2000 Phone can be positioned in 3 different ways: If you have already subscribed to a Caller Display network service, the time and date on the display will...
  • Page 10 Press the Setup button. Setup Enter 5 then 0 using the keypad. The display shows: (the hour flashes) 12:00 AM 01 JAN Enter the hour using the keypad. Press the Setup button (minutes flash). Setup Enter the minutes using the keypad. Press the Setup button ( AM/PM flashes).
  • Page 11: Using The Telephone

    Using the telephone Making and receiving calls To receive a call To make a call When the phone rings, either: Pick up the handset and speak. Lift the handset and listen for a dialling tone. Press the Handsfree button. Handsfree Dial the number you require.
  • Page 12: Redial

    Calls button and Calls List Dial the number you require. Now speak to your caller through the For your BT In Touch 2000 to function fully you microphone. should subscribe to your network’s Caller Display service. A quarterly fee is usually payable.
  • Page 13 To view the Calls List To delete an individual call from the Calls List Press the Calls button. The display shows Calls details of the most recently received call. Press and hold down the Calls button to Calls scroll through the Calls List until you come 2:39 pm 15 APR to the entry you wish to delete.
  • Page 14: Using The R (Recall) Button

    Directory. Store Press the Store button. To find out more about BT Calling Features, please call BT free on 0800 800 150. The display shows: 2:39 pm 15 APR...
  • Page 15: Quickdial And Directory

    Quickdial and Directory Storing a name and number in the Press the 5 button until the display shows J . Quickdial memory Press the 6 button until O is shown. Press the 4 button until H is shown. Press Store. The display shows: Store Press the 6 button until N is shown.
  • Page 16: Directory

    Press the Store button. Store Directory The display shows: You can store up to 10 names and numbers ENTER THE NAME in the Directory. THEN PRESS STORE Enter the name of the person you wish to Please note store (see page 13 for how to enter names). When storing and editing names and numbers, you Press the Store button.
  • Page 17: To Use Your Cancel Button

    Deleting entries from the Directory Press the Directory button repeatedly Directory until the display shows the entry you wish to delete. Press the Cancel button twice. Cancel The display shows: (after first press) PRESS CANCEL TO DELETE Your entry has now been deleted. To use your Cancel button The Cancel button can be used to delete entries in the Calls List and Directory.
  • Page 18: Desk And Wall-Mounted Phone Positions

    Your BT In Touch 2000 can be positioned in 3 ways: • Flat on a table or desk. Raised Your BT In Touch 2000 can be placed on a table or desk and raised using the base stand. • Raised on a table or desk using the Press all the cables coming from the BT In Touch base stand.
  • Page 19: Wall-Mounted

    WALL PLUG SCREW WALL Wall-mounted Your BT In Touch 2000 can be wall-mounted using the screws and wall plugs provided. Press all the cables coming from the BT In Touch 2000 into their guides on the underside of the unit, Please note as shown below.
  • Page 20 Rotate the handset hook 180˚ so that you can hang up the handset when the phone is wall-mounted. Hang the holes on the back of the phone over the screwheads and gently pull the phone downward to make sure it is securely in place. Feed the phone line through the bottom of the wall- mounted base stand to allow the cable to rest flat against the wall.
  • Page 21: On Your Bt In Touch 2000

    BT In Touch 2000 and a series of beeps. The BT within hearing distance of your BT In Touch 2000.
  • Page 22: Entering Your Emergency Contacts

    Press the Store button. Store Entering your emergency contacts The display shows: Although the BT In Touch 2000 will accept “999” as 12:00 AM 01 JAN SELECT LOCATION a phone number which can be allocated emergency status, it is not recommended. BT strongly Press the # button.
  • Page 23 Failure to enter this code Quickdial number can then be used in an emergency within 1 minute will cause the BT In Touch 2000 to and the Directory number in a non-emergency. try the alternative emergency numbers.
  • Page 24: Changing Quickdial Memory Numbers

    The announcement tells completion of your message. the called person that there is an emergency but can Your BT In Touch 2000 will playback “Your also convey important information about the caller, emergency announcement is...” and then the for example “I am an asthmatic and my call-out...
  • Page 25: Status Announcements

    Store If you hear “Please change batteries” Your BT In Touch 2000 will play back Replace the batteries in the BT In Touch 2000 as soon “Your emergency announcement is...” and as possible. 6 x AA Alkaline batteries are required, then the original pre-recorded emergency see ‘Install the batteries’...
  • Page 26: Using The Bt In Touch

    There are two ways to start the emergency sequence on the BT In Touch 2000 – from your BT In Touch The BT In Touch 2000 will beep to confirm that the Pendant and from your BT In Touch 2000 itself.
  • Page 27: Cancelling An Emergency Call At The Bt In Touch 2000

    Then press the 2-digit code to change the “Emergency call. Please hang up now”. relevant setting: The BT In Touch 2000 will then wait a few seconds and try to start the emergency sequence. If the 00 Optional voice prompts ON.
  • Page 28 Emergency button (on the phone or Pendant). The time can be changed from one to nine seconds in order to help you test your BT In Touch To set the contrast of the display Pendant. Lift the Quickdial memory label to reveal...
  • Page 29: Returning Your Bt In Touch 2000 To Its Factory Settings

    Lift the Quickdial memory label to reveal Announce the Setup button. Setup The BT In Touch Pendant has a battery life of about Press the Setup button. Setup 5 years (based on 2 presses a day) and a range of The display shows: up to 50 metres from the BT In Touch 2000.
  • Page 30: Registering Your Bt In Touch Pendant

    The pendant receiver aerial which hangs from the back of your BT In Touch 2000 needs to be uncoiled. Testing the range of the BT In Touch Pendant You need to check the performance of the BT In...
  • Page 31 Important Your BT In Touch 2000 will dial the stored Whenever you change the location of the emergency contact numbers you have BT In Touch 2000, you should test the BT In Touch programmed (see page 20). Pendant again. Important...
  • Page 32: Bt In Touch Pendant Battery Low Warning

    When the battery in your BT In Touch Pendant has about a year’s life left, the BT In Touch Pendant will warn you by flashing 3 times every time the Pendant button is pressed, and the voice prompt will say “Replace Pendant soon”.
  • Page 33: Maintenance

    If your BT In Touch 2000 needs repair after the warranty period has ended, call the BT In Touch Clean your BT In Touch 2000 with a damp cloth (not Product Helpline on 0845 6011 406 for information wet) or an antistatic wipe. Never use a dry cloth as on our recommended repair agents.
  • Page 34: Help And Advice

    No dial tone BT accepts no responsibility for damage caused to Is the telephone line cord plugged into the your BT In Touch 2000 by using any other batteries telephone socket? than the type recommended. Check that the power cable is connected to the mains power.
  • Page 35: Technical Specification

    Technical specification BT In Touch 2000 Radio frequency and bandwidth ....173MHz, 25kHz Power supply ........9V, 300mA Batteries..........6 x AA Alkaline Standby power........7 hours Signalling..........Tone Recall key function .......Timed Break Recall Handsfree ...........Enhanced Quality Voice Channel (can be switched into simplex mode) Hearing aid compatibility.......Yes...
  • Page 36: Index

    Index Additional features Emergency call At a glance cancelling Batteries button disposal engaged installation contacts low warning 5, 30, 32 announcements recommended type alerts replacing For your records warning alerts 5, 23 Guarantee Caller Display Calls button Handsfree Calls list Help copying to directory Maintenance...
  • Page 37 Recall Receive a call Redial Registering Returning your product Ringer tone Ringer volume 6, 10 Safety information Secrecy Service Setting up Technical specifications Telephone line cord Time and date Volume ringer speaker Wall-mounting Warning alerts 5, 23...
  • Page 38 Nothing in this publication forms any part of any contract. © British Telecommunications plc 2005. Registered Office: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000. BT In Touch 2000 (03/05) 3 Designed by The Art & Design Partnership Limited. CE compliant to R&TTE Directive (1999/5/EC)

Table of Contents