Adding The Date - Epson PictureMate PM 240 Manual

❏
PhotoEnhance - Use this if a print does not
look good; for example, this may correct
images that are too dark, too bright, or backlit.
❏
P.I.M. - Process images according to the
PRINT Image Matching information in your
digital files. This information helps to ensure
an accurate image reproduction.
❏
Off - Prints photos as is or bypasses P.I.M. or
Exif Print data (default setting for files with no
P.I.M or Exif Print data).
To make manual adjustments in addition to the
automatic ones, follow the steps in the next section.
Manually adjusting your photos
1. Press the Menu button.
2. Press the d button to highlight the Edit menu, then
press the right soft key.
Press the d button to highlight Fix Photos, then
3.
press the right soft key.
4. Press the d button to highlight Brightness,
Saturation, or Sharpness then press the right soft
key.
34
Printing Options
PictureMate PM 240 / PM 280
5. Adjust other settings as necessary, then press the
right soft key.
6. Choose the photo you want to apply this setting
to, then press the right soft key.

Adding the Date

You can add the date your photo was originally taken
to the bottom right corner of your print.
This function is not available for some print layouts.
1. Press the Menu button.
2. Press the d button to highlight the Setup menu,
then press the right soft key.
3. Make sure Date Stamp is highlighted, then press
the right soft key.
4. Press the d button to highlight On, then press the
right soft key.
❏
Off (default, turns off the date stamp)
❏
On (date, month, year: 26.Aug.2006)