Epson PictureMate PM 240 Manual page 11

When using LCD screen
❏
The LCD screen contains a few small bright or
dark spots. These are normal and do not mean
that the LCD screen is damaged in any way.
❏
Only use a dry, soft cloth to clean the LCD screen.
Do not use liquid or chemical cleansers.
❏
If the LCD screen on your printer's control panel
is damaged, contact your dealer. If the liquid
crystal solution gets on your skin, wash them
thoroughly with soap and water. If the liquid crystal
solution gets into your eyes, flush them
immediately with water. If discomfort or vision
problems remain after a thorough flushing, see a
doctor immediately.
When using the optional Bluetooth Photo
Print Adapter
Refer to the Bluetooth Photo Print Adapter's
documentation for the safety instructions.
When using the optional battery
❏
If battery acid gets into your eyes or on your skin,
immediately rinse the affected area thoroughly
with water and seek medical treatment. If a battery
is swallowed, seek medical treatment
immediately.
❏
Use only an Epson Li-ion battery model D121A for
this printer according to the directions in the user
documentation. Replacing the battery with an
incorrect model may cause an explosion.
❏
Use only AC adapter model A381H to charge the
battery and operate the printer.
❏
Do not charge or use the battery with devices
other than the specified product. Using the battery
with other devices may damage the battery or
other devices, or may cause an explosion.
❏
To protect against short circuits, do not remove
the outside case of the battery.
❏
Do not handle the battery with wet hands or use
them near water.
❏
Do not expose the battery to water or high
humidity.
PictureMate PM 240 / PM 280
Safety Instructions
11