Charging The Battery; Removing The Battery - Epson PictureMate PM 240 Manual

4. Insert the battery into the compartment in the
direction shown below until it is fixed in place.

Removing the battery

1. Make sure that PictureMate is turned off.
2. Press the release latch and pull out the battery.
78
Ink, Paper, and Options
PictureMate PM 240 / PM 280
3. Attach the battery cover as shown below.

Charging the battery

After installing the battery, charge the battery using the
AC adapter.
1. Make sure that the battery is installed.
2. Connect the power cord and AC adapter, then
plug in PictureMate.
When PictureMate is off, the power light blinks
during charging. When the battery is fully charged,
the power light turns off.
When PictureMate is on during charging,
blinks on the LCD screen. When the battery is fully
charged, icon appears.
icon