Set Up Your Internet Service Provider (Isp) - BT EASICOM TV3 User Manual

To change the "User 1" password
Your Easicom
name 'USER 1' and one password.
You should start by changing this
name and password.
The Set Up screen is displayed.
Set-up
Display shows User 1.
USERS
Cursor is shown next to OLD
CHANGE
PASSWORD
PASSWORD. Type password. If you
make a mistake press the BACKSPACE
key to delete the last letter.
Cursor moves to NEW PASSWORD.
Enter
Type the new password you want.
Cursor moves to confirm PASSWORD.
Enter
Type the new password again.
Screen returns to USER SET UP.
SAVE
To change the "User 1" name
Cursor moves to PLEASE ENTER
CHANGE
USER NAME
PASSWORD. Type in the new
password you have just set.
Cursor moves to NEW USER NAME.
Enter
Type in the name you want.
The new name is saved and displayed.
SAVE
You can now add further names.
12
T V3 is pre-set with one
To enter the names of other e-mail
users
Display shows Set Up screen.
Set-up
Display shows all current user names.
USERS
Type in the name of the user. If you
NEW USER
make a mistake, press the
key to delete the character.
The cursor moves to PASSWORD.
Enter
Enter a password to prevent anyone
else reading your e-mail. (You will have
to type this each time you want to
access your e-mail folder. For no
password, just press the ENTER key).
The cursor moves to CONFIRM
Enter
PASSWORD. Type the password again,
if required.
To confirm. Screen shows SAVING
SAVE
NEW USER and then displays the name
you have just entered. You can now add
another new user.
Up to 5 different users can have their
own e-mail accounts. If possible, you
should enter all the names you want
before you connect to the e-mail service
provider.
If you enter an incorrect password,
the screen shows INCORRECT PASSWORD
and then lets you try again.
BACKSPACE