BT EASICOM TV3 User Manual page 10

The three red lights on the Set Top box flash on
and off.
Your TV screen flashes INITIALISING and
then shows the TIME SET UP screen.
To enter the time and date manually
Press keys in the order shown
Please enter current date and time
Date(dd:mm:yyyy) 01/01/2000
Time(hh:mm)
The text should be displayed centrally
on your TV screen as shown above.
If the text is not central, you can change
the position of the text by holding down
the key and using the 4 arrow
SHIFT
keys. This facility is only available when
you power the product up and the
'Time set up' screen is displayed.
Use the number keys on the keyboard
KEYPAD
to enter the date and time.
Press the
cursor.
Select AM or PM by moving the cursor
to the setting you want. It is important
that you enter the correct date as an
incorrect date can cause some e-mail
systems to reject any mails that you send.
To confirm the time. The screen
SAVE
returns to the TV channel.
Time set up
01:00 AM PM
Save Cancel
keys to move the
PLEASE NOTE
If you have subscribed to Caller Display,
the time and date (but not the year) is entered
automatically into your Easicom
receives its first incoming call. Incoming calls
then ensure the correct time is kept.
POWER FAILURE
In the event of a power failure to the Easicom
all stored data will be saved in the memory except
date and time information.
Set up options
9
The Easicom allows you to configure a
TV3
product to your individual requirements.
However, BT have already pre-configured most
settings for typical use.
The various options are explained in more detail
below:
System set up
Screen shows SET UP and the Set Up
Set-up
options of USERS; EMAIL; SYSTEM
and PRINTER.
Screen shows SYSTEM SET UP.
SYSTEM
Moves the cursor to the next option.
Tab/Aux
Moves the cursor back and forward
between the options.
TV3 when it
TV3
,
9