Cleaning Heat Exchanger - Electrolux EDC 5369 User Information

Cleaning heat exchanger

If the HEAT EXCHANGER (WÄRMETAUSCHER) dis-
play is illuminated, the heat exchanger needs to be
cleaned.
1
Caution! Operating when the heat exchanger
is clogged with lint can damage the dryer. This
also increases energy consumption.
1. Open loading door
2. Open base door. To do this, press the release but-
ton located beneath the loading aperture and open
the base door to the left.
3. Remove lint from the inside of the door and the
heat exchange chamber. Wipe the door seal with a
damp cloth.
4. Turn both lock washers inwards.
5. Use the handle to pull the heat exchanger out of
the base and carry it horizontally to prevent any re-
maining water from spilling.
6. To empty the heat exchanger, hold vertically over a
washing-up bowl.
1
Caution! Do not use sharp objects to clean.
The heat exchanger could develop leaks.
7. Clean heat exchanger.
It is best to use a brush or to rinse thoroughly with
a shower head.
8. Replace heat exchanger and lock into place (turn
both lock washers outwards until they snap into
place).
9. Close base door.
3
The dryer will not operate if the HEAT EX-
CHANGER (WÄRMETAUSCHER) indicator is
still lit.
1
Caution! Never operate the dryer without the
heat exchanger.
16