Table of Contents
Advertisement
Cleaning the heat exchang-
er
If the display shows PLEASE CLEAN THE CON-
DENSER, the heat exchanger must be cleaned.
1
Caution! Operating when the heat exchanger
is blocked with fluff can damage the dryer.
This also increases energy consumption.
1. Open door.
2. Open door in plinth. To do this, press the release
button on the bottom of the door aperture and
open the door in the plinth to the left.
3. Clean fluff from the inside of the door and the heat
exchanger front chamber. Wipe the door seal with
a damp cloth.
4. Turn both lock washers inwards.
5. Use the handle to pull the heat exchanger out of
the base and carry it horizontally to prevent any re-
maining water from spilling.
6. To empty the heat exchanger, hold vertically over a
washing-up bowl.
1
Caution! Do not use sharp objects to clean.
The heat exchanger could develop leaks.
7. Clean heat exchanger.
It is best to use a brush or to rinse thoroughly with
a hand-held shower.
8. Replace heat exchanger and lock into place (turn
both lock washers outwards until they snap into
place).
9. Close door in plinth.
1
Caution! Never operate the dryer without the
heat exchanger.
23
Advertisement
Table of Contents
