Windows Xp - Buffalo WAPS-APG600H User Manual

Windows XP

To configure TCP/IP in Windows XP, follow the procedure below.
1
Open [Control Panel].
2
Double-click [Network].
3
Right-click on the network adapter, then click [Properties].
4
Select [Internet Protocol (TCP/IP)], then click [Properties].
5
To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and [Obtain
DNS server address automatically].
Alternately, you can configure the settings manually. Example:.
If the router's IP address is 192.168.11.1,
IP address: 192.168.11.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.11.1
Preferred DNS server: 192.168.11.1
Alternate DNS server: blank
6
Click [Close].
85