Basic - Buffalo WAPS-APG600H User Manual

WPS by PIN
WPS Status
SSID
Encryption Type
Encryption Key
The setting items for IEEE802.11g and IEEE802.11a are grouped together in this explanation.

Basic

Configure the basic information for wireless LAN here.
Wireless Settings - 802.11g or 802.11a - Basic
Wireless
Band
Enable SSID#
After you enter the PIN code and click [Start], the internal registrar of the
AirStation waits 2 minutes for the connection request from the enrollee
with the PIN code.
Displays "Configured" or "Not Configured". "Configured" is displayed if all
currently-available wireless bands are configured. "Not Configured" is
displayed even if only 1 wireless band is not configured.
Displays the SSID used in WPS. This is not displayed when the WPS status
is "Not Configured".
Displays the encryption method used by WPS. This is not displayed when
the WPS status is "Not Configured".
Displays the encryption key used by WPS. This is not displayed when the
WPS status is "Not Configured".
Select whether enable or disable wireless LAN.
This is used to set the wireless mode. To set manually, select "User-
defined". In communication with devices that are set as WDS connection
devices, the transmission speed is determined automatically regardless
of the user-defined setting.
Specify enabled number of the SSIDs from SSID1 to SSID5. You may
specify up to 5 SSIDs each for 11g and 11a.
35