Lan Port - Buffalo WAPS-APG600H User Manual

LAN Port

Configure the wired LAN port here.
LAN Settings - LAN Port
Wired LAN Port
Enable
Speed & Duplex
MDI
Flow Control
802.3az
Displays the port number of the wired LAN port.
Select whether enable or disable the wired LAN port.
Select the communication speed of the wired Ethernet connection.
Normally, use "Auto". If the connected device cannot be automatically
recognized, try to use another one.
Select the communication status (straight-through or crossover
connection) of the AirStation with the connected device.
Normally, use "Auto". If the connected device cannot be automatically
recognized, try to use another one.
Select whether enable or disable flow control. If flow control is enabled,
overflows of the receive-side buffer are detected and a specific frame is
sent to enable send-side restriction.
Select whether enable or disable IEEE802.3az EEE. When enabled, the
power supplied to the LAN port can be limited when data is not flowing.
Note: The device connected to the AirStation also must support
IEEE802.3az EEE.
27