Table of Contents
Advertisement
•
When the focus or exposure is not suitable, the frame of the focus area turns red.
• To review the last captured image, press the
to Snapshot mode.
• The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.
• To prevent your images from being blurred while pressing the shutter button, always hold
the camera steady. This is especially important when you are shooting under low lighting
conditions, under which your camera may reduce the shutter speed to ensure your
images are properly exposed.
3.3.5 Using the flash
The flash is not only for taking pictures when there is insufficient light, but also when the
subject is in shade or in backlight conditions. Pressing the flash button cycles your camera
through the various flash modes. The flash will not activate when continuous shooting or
movie recording.
1. Turn the power on, and set the camera to the REC mode.
2. Pressing the flash button changes the flash mode. Each time the flash button is pressed,
the flash icon changes.
3. Press the shutter button to take a picture.
Icon
Flash mode
Auto flash
Red-eye
reduction
Force on
Slow sync
Force off
3.3.6 Using the self-timer and burst
Use the self-timer to set a delay from the time the shutter button is pressed to the time the
image is shot. Use the burst to record continuous still images shooting.
1. Turn the power on, and set the camera to the REC mode.
2. Open the REC menu. Use [
3. Change the setting. Press [
4. Press the shutter button to take a picture.
6
Using the Camera
Description
Flash fires automatically when shooting conditions require extra
lighting.
Flash strobes to let the subject eyes adjust to the flash, then fires
again to take the actual image. Your camera will detect the
subject brightness and use the flash only when required.
Flash fires every time you take a photo, regardless of lighting
conditions.
Flash fires with a slow shutter speed.
The flash never fires even in dark situation.
] / [
] to select
] / [
] to select a drive mode, then press
button. Press the
from the REC menu.
Drive mode
button to return
OK
.
Advertisement
Table of Contents
