Something Not Working; Technical Assistance - Electrolux EOC 6500 Instruction Booklet

Something not working

If the appliance is not working correctly, please carry out the following checks, before contacting your local
Service Centre.
SYMPTOM
"
The oven does not come on.
"
The oven light does not come on.
"
It takes too long to finish the dishes, or they are
cooked too fast.
"
Steam and condensation settle on the food and the
oven cavity.
"
The electronic programmer does not work.
"
The oven fan is noisy.
"
An error code, (for example "F..xx") appears on the
control panel.
! ! ! ! !
The display shows "12.00".

Technical assistance

If after the checks listed in the previous chapter, the
appliance still does not work correctly, contact your
local Service Centre, specifying the type of
malfunctioning, the appliance model (Mod.), the product
number (Prod. No.) and the serial number (Ser. No.)
marked on the identification plate.
This plate is placed on the front external edge of the oven
cavity (see figure aside).
Original spareparts, certified by
the product manufacturer and
carrying this symbol are only
available at our Service Centre
and authorized spareparts
shops.
SOLUTION
#
Press the OVEN ON button, then select a cooking
function.
#
Check the fuse and ensure the socket switch or the
switch from the mains supply to the oven are ON.
#
Switch on the oven using push button
#
Check the light bulb, and replace it if necessary (see
"Replacing the Oven Light").
#
The temperature may need adjusting
#
Refer to the cooking function sections and to any
cooking chart provided.
#
Leave dishes inside the oven no longer than 15-20
minutes after the cooking is completed.
#
Check the instructions for the electronic programmer.
#
Check that shelves and bakeware are not vibrating in
contact with the oven back panel.
#
Take note of the error code and contact an authorised
Service Centre.
#
Set the time of day (see chapter "How the set the time
of day").
.
21